PMIC & ドライバー

SSP79A5 is ultra-low quiescent current regulator features and low dropout voltage. With 2μA quiescent current at no load. SSP79A5 retains all the features that are common to low dropout regulators including a low dropout PMOS pass device, foldback current limiter, and thermal shutdown. SSP79A5 has 100V maximum operating voltage, excellent load transient response, and -40°C to 85°C operating temperature range, and ±2% output voltage tolerance over the entire output current, input voltage, and temperature range. SSP79A5 regulators are available in standard SOT23-3L, SOT89-3 and SOT223 packages. SOT23-3L SOT89-3 SOT223

The SSP7955 is ultra-low quiescent current regulator features low dropout voltage and low current in the standby mode. With less than 2.4μA quiescent current at no load, the SSP7955 is ideally suited for standby micro-control-unit systems, especially for always-on applications like E-meters, fire alarms, smoke detectors and other battery-operated systems. The SSP7955 retains all of the features that are common to low dropout regulators including a low dropout PMOS pass device, short circuit protection, and thermal shutdown. The SSP7955 has 50V maximum operating voltage limit, and -40°C to 85°C operating temperature range, and ±2% output voltage tolerance over the entire output current, input voltage, and temperature range. The SSP7955 regulators are available in standard SOT23-3, SOT89 and SOT223 packages. SOT23-3 SOT89 SOT223

The H75XX-3 is ultra-low quiescent current regulator features and low dropout voltage. With 2μA quiescent current at no load. The H75XX-3 retains all of the features that are common to low dropout regulators including a low dropout PMOS pass device, foldback current limiter, and thermal shutdown. The H75XX-3 has 40V maximum operating voltage, excellent load transient response, and -40°C to 85°C operating temperature range, and ±2% output voltage tolerance over the entire output current, input voltage, and temperature range. The H75XX-3 regulators are available in standard SOT23-3L, SOT89-3 and TO92 packages. SOT23-3L SOT89-3 TO92

The H75RXX-1 is an ultra-low quiescent current regulator that features low dropout voltage. It has 2μA quiescent current when there is no load. The H75RXX-1 retains all the features that are common to low dropout regulators including a low dropout PMOS pass device, foldback current limiter, and thermal shutdown. The H75RXX-1 offers a 40V maximum operating voltage, excellent load transient response, an operating temperature range of -40°C to 85°C, and ±2% output voltage tolerance across the full range of output current, input voltage, and operating temperature. The H75RXX-1 regulators are available in standard SOT23- 3L, SOT23, SOT89-3 and TO92 packages.

LM78XX is three-terminal positive regulators. One of these regulators can deliver up to 1.5A of output current. The internal limiting of the regulator make them essentially immune to overload. When used as a replacement for a zener diode-resistor Combination, an effective improvement in output impedance can be obtained, together with lower quiescent current.

The LM78M05 is a three-terminal positive voltage regulator. It is mainly used as a fixed output voltage source in various electronic devices. With adequate heat dissipation and a suitable input voltage, it can deliver an output current of up to 500mA.

The 79LXX Series negative voltage regulators are cost - effective and user - friendly devices. They are well - suited for a wide range of applications that demand up to 150mA. One of the key features of this series is the inclusion of thermal overload protection and short - circuit protection. These protective mechanisms endow the regulators with remarkable ruggedness. In most cases, the operation of the 79LXX Series regulators does not require any external components. The 79LXX devices prove to be highly useful for on - card regulation or any application that calls for a regulated negative voltage at a moderate current level.

The H75XX-2 series is a set of three-terminal low power high voltage regulators implemented in CMOS technology. They allow input voltages as high as 35V. They are available with several fixed output voltages ranging from 3.0V to 5.0V. CMOS technology ensures low voltage drop and low quiescent current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain variable voltages and currents.

The SSP7935 series is a group of positive voltage output, three-pin regulators, that provide a high current even when the input/output voltage differential is small. Low power consumption and high accuracy is achieved through CMOS and laser trimming technologies. The SSP7935 consists of a high-precision voltage reference, an error amplification circuit, and a current limited output driver. Transient response to load variations have improved in comparison to the existing series.