PMIC et pilote

Recherche

Catégories de produits

SSP4095

The SSP4095 is a 5V-input, 1.2A-max boost-mode charge management IC for 3-cell Li-ion battery packs in series. SSP4095 integrates a power MOSFET in an asynchronous switching topology requiring very few external components, shrinking solution size and BOM cost. The boost switching charger operates at 500kHz with up to 90% conversion efficiency. Four feedback loops govern the charge cycle: constant-current (CC), constant-voltage (CV), die-temperature regulation, and an adaptive input-current loop that prevents adapter collapse and works with any adapter. SSP4095 integrates a 24V OVP function, so the input port safely tolerates up to 24V transients and charging is disabled above 6V input.

SSP4090

The SSP4090 is a 5V-input, 1.5A-max boost-mode charge management IC for 2-cell Li-ion battery packs in series. SSP4090 integrates a power MOSFET in an asynchronous switching topology requiring very few external components, shrinking solution size and BOM cost. The boost switching charger operates at 500kHz with up to 90% conversion efficiency. Four feedback loops govern the charge cycle: constant-current (CC), constant-voltage (CV), die-temperature regulation, and an adaptive input-current loop that prevents adapter collapse and works with any adapter. SSP4090 integrates a 24V OVP function, so the input port safely tolerates up to 24V transients and charging is disabled above 6V input, making it ideal for USB-powered applications.

SSP4056H

The SSP4056H is a complete constant-current/constant-voltage linear charger IC for single-cell Li-ion batteries with high input voltage and high charge current capability. The input withstands up to 28V and provides 6.8V automatic over-voltage protection with up to 1A charge current. The minimum operating input is 3.8V, enabling customers to dynamically adjust the input voltage to lower charge dissipation and improve overall efficiency. The internal PMOS architecture and built-in anti-reverse-charge path eliminate the need for an external isolation diode. Thermal feedback regulates the charge current automatically, limiting die temperature under high-power or high-ambient-temperature conditions. SSP4056H offers 4.15V / 4.2V / 4.35V float-voltage options; the charge current is set with a single external resistor. When the battery reaches the float voltage the current tapers, and charging terminates when the current drops to one-tenth of the set value.

H8118

The H8118 Series is a Synchronous step-up DC/DC Converter with PFM Control. With the H8118 Series, a step-up switching DC/DC converter can be configured by usingan external coil, capacitor. The built-in MOSFET is turned off by a protection circuit when the voltage at the LX

SSP55080

SSP55080 is a general LCD driver IC with 8COMx35SEG total output capacity of 280 bits, suitable for commonly used character/graphic LCD screens. SSP55080 support serial data interface(I2C).

SSP8011AM

The SSP8011AM is a low-cost and low-power single-key capacitive touch sensor IC, which provides single-channel touch sensing channels. Built-in voltage regulator circuit, few peripheral components, simple design, only a few components can complete the hardware design. Provides 2 output modes, high/low level output optional. It also provides a Reset function after a maximum button press time of 9 second. The sensitivity of the touch-sensitive keys can be adjusted as needed by adjusting the capacity of the external capacitance (CS), which increases the operability of the product and makes the design more flexible and versatile.

SSP706

SSP706 — Voltage Detection and Reset Chip: TTL/CMOS

H9118B

The H9118B is a low-EMI, synchronous buck converter with integrated power MOSFETs. It delivers up to 2A continuous output current across a wide input voltage range with excellent load and line regulation. The H9118B uses precision-controlled switch edge technology to minimize EMI. Comprehensive protection includes programmable output over-voltage protection (OVP), constant on-time (COT) control, and thermal shutdown (TSD). H9118B is housed in a TSOT23-6 package and requires only a few external components to achieve a compact, efficient and stable power solution.

SSP7786A

SSP7786A is a compact, inductor-less, offline linear regulator. It steps down the AC line voltage to 5V, 3.3V and 2.7V by internal. It is a simple solution to provide a bias voltage to ICs in offline applications. SSP7786A integrates a 650V power MOSFET, startup control circuit, VDD voltage control circuit, AC signal synchronization detection circuit, low dropout regulator, etc. The chip integrated smart-control system uses AC line power only when necessary, thus minimizing device losses to achieve good efficiency, and effectively reduce the system standby. SSP7786A integrates complete protection functions with self-recovery function: VDD Under Voltage Protection, VDD Over Voltage Protection, output Over Load Protection, output Under Voltage Protection, Lightning Surge Protection and built-in Thermal Shutdown Protection.

SSP7786

SSP7786 is a compact, inductor-less, offline linear regulator. It steps down the AC line voltage to 5V, 3.3V and 2.7V by internal. At the same time, VOUT1 can provide a set of 0.66 × VOUT output voltage. It is a simple solution to provide a bias voltage to ICs in offline applications. SSP7786 integrates a 650V power MOSFET, startup control circuit, VDD voltage control circuit, AC signal synchronization detection circuit, low dropout regulator, etc. The chip integrated smart-control system uses AC line power only when necessary, thus minimizing device losses to achieve good efficiency, and effectively reduce the system standby. SSP7786 integrates complete protection functions with self-recovery function: VDD Under Voltage Protection, VDD Over Voltage Protection, output Over Load Protection, output Under Voltage Protection, Lightning Surge Protection and built-in Thermal Shutdown Protection.

PMIC et pilote

Recherche

Catégories de produits

Dites-moi ce dont vous avez besoin