PMIC & Driver

Search

Product Catgories

SSP8012

The SSP8012 is a low-power dual-key touch sensor IC. The operating mode is divided into Normal mode and Low Power mode.

ULN2003 is a single-chip integrated high voltage, high current Darlington tube array, The circuit contains seven independent Darlington tube drive single channel. The circuit is designed with continuous diode, which can be used to drive relay,stepping motor and other inductive loads. A single darlington collector can output 500mA current. Higher output current capacity can be achieved by connecting darlington tubes in parallel.

SSP8018

SSP8018 is a synchronous boost converter designed for battery-powered devices. The device supports a variety of battery types, including alkaline, nickel-metal hydride rechargeable batteries, lithium-manganese batteries, and lithium-ion rechargeable batteries. Its standout advantage lies in its high efficiency under light load conditions, a characteristic crucial for extending battery life. In the application scenario of 3.3V boost to 5V, the chip is able to output current up to 300mA. Of particular note is the system achieving up to 90% conversion efficiency at a load current of 200mA. SSP8018 chip offers two operating modes to suit different application scenarios: buck mode and pass-through mode. In buck mode, when the input voltage is higher than the output voltage (VOUT<VIN<VOUT + 0.3V), the chip can still accurately adjust the output voltage to the target value. This mode is suitable for scenarios where a stable output voltage is required. When the input voltage exceeds the output voltage by more than 0.3V (VIN>VOUT + 0.3V), the chip automatically switches from buck mode to pass-through mode. In pass-through mode, the output voltage will follow the input voltage. SSP8018 has a true shutdown function that completely disconnects the load from the input power supply when the device is disabled, significantly reducing current consumption. SSP8018 is available in a fixed output voltage version.

SSP2617

SSP2617 is a single-channel H-bridge driver chip, providing an integrated motor drive solution for toys, robots, consumer goods and other low-voltage or battery-powered motion control applications. The maximum operating voltage of SSP2617 is 25V. It can provide a continuous output current of up to 3.0A and a peak output current of 5.0A. It also features over-temperature protection with a shut-off function and overcurrent protection (IOCP = 5.0A).

SSP9492

SSP9492 is a monolithically integrated switched-off step-down constant-voltage driver with programmable output current, which can operate over a wide input voltage range and has excellent load and linearity regulation. Safety protection mechanisms of SSP9492 include peak current limiting per cycle, soft-start, over-voltage protection, temperature protection and short circuit protection, etc. It is very suitable for wide voltage input buck use. The unique soft-switching ZVS technology combined with the super junction medium-voltage MOSFET enables efficiency up to 93%. It supports typical circuit applications such as input 48V output 12V/2.5A, input 19V output 5V/4A, input 85V output 12V/2A, input 12V output 5V/3A.

SSP2927

The SSP2927 provides an integrated motor driver solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications. The device can drive one dc motor or other devices like solenoids. The output driver block consists of N- channel power MOSFETs configured as an H-bridge to drive the motor winding. An internal charge pump generates needed gate drive voltages. The SSP2927 can supply up to 1.8A of output current. It operates on a motor power supply voltage from 0 to 12 V, and a device power supply voltage of 1.8 V to 7 V. The SSP2927 device has a PWM (IN1-IN2) input interface. It is compatible with industry-standard devices. Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature.

SSP9323

SSP9323 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to provide a 3A continuous output current over a wide input supply range, with excellent load and line regulation. COT PSM control operation provides very fast transient response and easy loop design as well as very tight output regulation. The RY9320 requires a minimal number of readily available, external components and is available in a space saving ESOP-8 package.

SSP9322

SSP9322 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to provide a 2A continuous output current over a wide input supply range, with excellent load and line regulation. COT PSM control operation provides very fast transient response and easy loop design as well as very tight output regulation. The RY9320 requires a minimal number of readily available, external components and is available in a space saving SOT23-6 package.

SSP9302

The SSP9302 is a compact 5V Buck Converter which can deliver 1A output current. SSP9302 employs a proprietary control loop to achieve a fast transient load response. It keeps high converting efficiency in both light load and heavy load. SSP9302 is equipped with all kinds of protection, such as input over voltage protection, output short circuit protection, over current protection and over temperature protection. SSP9302 is consists of internal power tree generator, bandgap voltage reference module, under-Voltagelockout (UVLO) module, error amplifier, protection circuitry, driver block, current sensing block and two power MOSFETs. SSP9302 is housed in a SOT23-5 package.

SSP9301

The SSP9301 is a compact 5V Buck Converter which can deliver 1A output current. SSP9301 employs a proprietary control loop to achieve a fast transient load response. It keeps high converting efficiency in both light load and heavy load. SSP9301 is equipped with all kinds of protection, such as input over voltage protection, output short circuit protection, over current protection and over temperature protection. SSP9301 is consists of internal power tree generator, bandgap voltage reference module, under-Voltagelockout (UVLO) module, error amplifier, protection circuitry, driver block, current sensing block and two power MOSFETs. SSP9301 is housed in a SOT23-5 package.

PMIC & Driver

Search

Product Catgories

Tell me what you need