PM004MNIA
A novel non-volatile magnetic memory MRAM is an ideal device for non-volatile cache and main memory. The application prospect is not limited to the traditional computer storage system, but also can be extended to many other fields, and is even expected to become a general memory.
MRAM ensures that data will not be lost in the case of power failure and can prevent data damage caused by rays. In emerging applications such as the Internet of Things and big data, ubiquitous sensor terminals need to collect massive data. In order to save storage power, MRAM has become a popular candidate for its relatively good performance.
SSP9323
SSP9323 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to provide a 3A continuous output current over a wide input supply range, with excellent load and line regulation. COT PSM control operation provides very fast transient response and easy loop design as well as very tight output regulation. The RY9320 requires a minimal number of readily available, external components and is available in a space saving ESOP-8 package.
SSP9322
SSP9322 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to provide a 2A continuous output current over a wide input supply range, with excellent load and line regulation. COT PSM control operation provides very fast transient response and easy loop design as well as very tight output regulation. The RY9320 requires a minimal number of readily available, external components and is available in a space saving SOT23-6 package.
PM004MNIB
PM004 is a 4M Bit/512K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO (Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.
PM004MNEB
PM004 is a 4M Bit/512K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO (Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.
PN256KNIA
The PN256K is a 256K Bit/32K Byte IIC interface non-volatile memory. It adopts advanced PMTJ STT-MRAM technology to achieve read and write transmission of up to 400kHz, with excellent reliability and more than 20 years of data retention time.
PM256KNIA
PM256K is a 256K Bit/32K Byte SPI interface non-volatile memory. The chip adopts advanced PMTJ STT-MRAM technology, supports single-line SI and SO independent interfaces, achieves up to 20MHz read and write transmission, and has no delay in writing. It has excellent reliability and more than 20 years of data retention time. PM256K is an ideal solution for MCU to expand external memory. At the same time, due to the characteristics of fast throughput, few pins and small size, it has gradually become the choice of applications such as embedded, network switches, automobiles and the Internet of Things.
SSP9302
The SSP9302 is a compact 5V Buck Converter which can deliver 1A output current.
SSP9302 employs a proprietary control loop to achieve a fast transient load response. It keeps high converting efficiency in both light load and heavy load. SSP9302 is equipped with all kinds of protection, such as input over voltage protection, output short circuit protection, over current protection and over temperature protection.
SSP9302 is consists of internal power tree generator, bandgap voltage reference module, under-Voltagelockout (UVLO) module, error amplifier, protection circuitry, driver block, current sensing block and two power MOSFETs.
SSP9302 is housed in a SOT23-5 package.
SSP9301
The SSP9301 is a compact 5V Buck Converter which can deliver 1A output current.
SSP9301 employs a proprietary control loop to achieve a fast transient load response. It keeps high converting efficiency in both light load and heavy load. SSP9301 is equipped with all kinds of protection, such as input over voltage protection, output short circuit protection, over current protection and over temperature protection.
SSP9301 is consists of internal power tree generator, bandgap voltage reference module, under-Voltagelockout (UVLO) module, error amplifier, protection circuitry, driver block, current sensing block and two power MOSFETs.
SSP9301 is housed in a SOT23-5 package.
SSP9312
The SSP9312 is a high frequency, synchronous, rectified,step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to achieve a 2A continuous output current over a wide input supply range, with excellent load and line regulation.The SSP9312 requires a minimal number of readily available, external components and is available in a space saving SOT23-6 package.
