PM001MNxB
PM001 is a 1M Bit/128K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO (Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.
PU32F407
This chip is a highly integrated SOC chip that supports HPLC communication. The physical layer complies with the national grid standard Q/GDW12087.41. It adopts advanced digital-analog hybrid design technology and process, fully integrating the HPLC analog front-end circuit, digital signal processing circuit, memory, and MCU onto a single chip, thereby completing data modulation and demodulation as well as protocol layer processing.
The HPLC communication channel of this chip uses OFDM modulation and demodulation method, supporting a signal frequency range of 200KHz to 12MHz. It can support up to 411 subcarriers and supports BPSK, QPSK and 16QAM mapping for different rate modes to achieve a maximum transmission speed of 12Mbps. The chip is equipped with a powerful Turbo forward error correction and interleaving technology, and the transmission mode is flexible and configurable, enabling reliable communication even under strong noise interference.
This chip integrates a 32-bit MCU core and a rich set of on-chip resources, which can meet the software functional requirements and application development needs of the MAC layer and above of the power grid dual-mode communication protocol layer.
SSP9492
SSP9492 is a monolithically integrated switched-off step-down constant-voltage driver with programmable output current, which can operate over a wide input voltage range and has excellent load and linearity regulation. Safety protection mechanisms of SSP9492 include peak current limiting per cycle, soft-start, over-voltage protection, temperature protection and short circuit protection, etc. It is very suitable for wide voltage input buck use. The unique soft-switching ZVS technology combined with the super junction medium-voltage MOSFET enables efficiency up to 93%. It supports typical circuit applications such as input 48V output 12V/2.5A, input 19V output 5V/4A, input 85V output 12V/2A, input 12V output 5V/3A.
PM004MNIA
A novel non-volatile magnetic memory MRAM is an ideal device for non-volatile cache and main memory. The application prospect is not limited to the traditional computer storage system, but also can be extended to many other fields, and is even expected to become a general memory.
MRAM ensures that data will not be lost in the case of power failure and can prevent data damage caused by rays. In emerging applications such as the Internet of Things and big data, ubiquitous sensor terminals need to collect massive data. In order to save storage power, MRAM has become a popular candidate for its relatively good performance.
SSP9322
SSP9322 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to provide a 2A continuous output current over a wide input supply range, with excellent load and line regulation. COT PSM control operation provides very fast transient response and easy loop design as well as very tight output regulation. The RY9320 requires a minimal number of readily available, external components and is available in a space saving SOT23-6 package.
PN256KNIA
The PN256K is a 256K Bit/32K Byte IIC interface non-volatile memory. It adopts advanced PMTJ STT-MRAM technology to achieve read and write transmission of up to 400kHz, with excellent reliability and more than 20 years of data retention time.
SSP9302
The SSP9302 is a compact 5V Buck Converter which can deliver 1A output current.
SSP9302 employs a proprietary control loop to achieve a fast transient load response. It keeps high converting efficiency in both light load and heavy load. SSP9302 is equipped with all kinds of protection, such as input over voltage protection, output short circuit protection, over current protection and over temperature protection.
SSP9302 is consists of internal power tree generator, bandgap voltage reference module, under-Voltagelockout (UVLO) module, error amplifier, protection circuitry, driver block, current sensing block and two power MOSFETs.
SSP9302 is housed in a SOT23-5 package.
SSP9301
The SSP9301 is a compact 5V Buck Converter which can deliver 1A output current.
SSP9301 employs a proprietary control loop to achieve a fast transient load response. It keeps high converting efficiency in both light load and heavy load. SSP9301 is equipped with all kinds of protection, such as input over voltage protection, output short circuit protection, over current protection and over temperature protection.
SSP9301 is consists of internal power tree generator, bandgap voltage reference module, under-Voltagelockout (UVLO) module, error amplifier, protection circuitry, driver block, current sensing block and two power MOSFETs.
SSP9301 is housed in a SOT23-5 package.
SSP9312
The SSP9312 is a high frequency, synchronous, rectified,step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to achieve a 2A continuous output current over a wide input supply range, with excellent load and line regulation.The SSP9312 requires a minimal number of readily available, external components and is available in a space saving SOT23-6 package.
H75XX-H
The H75XX-H# series is a set of three-terminal low power high voltage regulators implemented in CMOS technology. They allow input voltages as high as 40V. They are available with several fixed output voltages ranging from 1.8V to 5.0V. CMOS technology ensures low voltage drop and low quiescent current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain variable voltages and currents.