통신 및 인터페이스

검색

제품 카테고리

SSP583X

The SSP583X series are 3-channel digital isolators using chip-scale high-voltage isolation technology withstanding 5KVrms. These devices feature low radiation, superior anti-EMI performance, high data rate and low power consumption. An enable pin places the outputs in a high-impedance state. The fail-safe mode restores outputs to the default level when the input supply is unpowered. The series offers 3-in-0-out and 2-in-1-out configurations — see the Selection Table for full product details.

SSP582X

SSP582X series is a Dual-channel digital isolator, using chip level high voltage isolation process, isolation voltage up to 5KVrms. This series of products have low radiation, excellent anti-electromagnetic interference performance, high transmission rate and low power consumption. It has fail-safe mode, which can restore the output to the default state when the input power loss. This series of products have 2 in 0 out, 1 in 1 out, and other specifications, the specific product information, see the product selection table.

MAX13085

The MAX13085 is a half-duplex high speed transceiver for RS-485 and RS422 communication. IC contains one driver and one receiver. The MAX13085 has a fail-safe circuit. It has a slew-rate-limited driver that reduces EMI and reflection due to improperly matched terminal cables, and achieves error-free data transmission of up to 2Mbps. Each driver output and receiver input is protected against ±15kV electrostatic discharge (HBM) (ESD)shocks. The MAX13085 receiver has 1/8 unit load input impedance, allows up to 256 devices can be attached to the bus. Mainly used in RS-485/RS-422 communication system.

MAX3085

The MAX3085 is a half-duplex high speed transceiver for RS-485 and RS422 communication. IC contains one driver and one receiver. The MAX3085 has a fail-safe circuit, ensure logical high level of receiver output when receiver input is open or short. It can achieve error-free data transmission of up to 500kbps. The MAX3085 receiver has 1/8 unit load input impedance, allows up to 256 devices can be attached to the bus.

SSP485

SSP485는 RS-485 및 RS422 통신을 위한 반이중 고속 트랜시버입니다. IC에는 하나의 드라이버와 하나의 수신기가 포함되어 있습니다.SSP485에는 페일 세이프 회로가 있습니다. 각 드라이버 출력과 수신기 입력은 ±15kV 정전기 방전(HBM)(ESD) 충격으로부터 보호됩니다.SSP485 수신기는 1/8 단위 부하 입력 임피던스를 가지며, 최대 256개의 장치를 버스에 연결할 수 있습니다. 주로 RS-485/RS-422 통신 시스템에 사용됩니다.