PM004MNEB

Short Description:

PM004 is a 4M Bit/512K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO (Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.

Tags: Active component, Anolog IC, electric energy measurement, electronic component, hot-prod

Product Detail

Features

Density

4M Bit/512KByte

Fast SPI interface with 8-bit data width addressing

Up to 54MHz clock frequency @SPISDR
Support SPI Mode0 and SPI Mode3

Operation voltage

TypicalVoltage：3V

Data protection

Protection mode with WP#EN, TBSEL, BP0, BP1, BP2 in mode registerSR#1

Power consumption

Sleep current 10μA (Typical value)
Standby current 100μA (Typical value)
Active current 12mA (Typical value @SPI54MHz)

Package

SOP8

Parameter table

Absolute Maximum Rating

Symbol	Parameter	Test Conditions	Value	Unit
VCC	Power supply voltage		-0.5~4	V
V_IN	Any pin voltage		-0.5~(VCC+0.5)	V
I_OUT	Each pin output current		±20	mA
TBIAS	Temperature under bias pressure	Industrial grade	-40~125	℃
Tstg	Storage temperature		-55~150	℃
Hmax_write	Maximum magnetic field	Write	4,000	A/m
	during writing
Hmax_read	Maximum magnetic field during reading or standby mode	Reading or standby	12,000	A/m
Hmax_poweroff	Maximum magnetic field during power off	Power off	40,000	A/m

Operating conditions

Symbol

Parameter

Min

Max

Unit

VCC

Power supply voltage

2.7

3.6

T_A

Temperature (industrial)

-40

125

℃

DC characteristics

Symbol	Parameter	Test Conditions		Min	Typ.	Max	Unit
\|ILI\|	Input leakage current	0≤ CE# ＜VCC		–	–	140	μA
		CE# = VCC		–	–	1	μA
		WP#, HOLD#, CLK, SI = 0V~VCC		–	–	1	μA
\|ILO\|	Output leakage current	SO = 0V~VCC		–	–	1	μA
I_SLP	Sleep current	CE# = VCC All inputs VSS or VCC		–	10	145	μA
I_SBY	Standby current	CLK = SI = CE# = VCC		–	100	5600	μA
I_CC	Operating current	SPI Write	CLK = 1MHz	–	9	16	mA
			CLK = 40MHz	–	11	18	mA
			CLK = 54MHz	–	12	19	mA
		SPI Read	CLK = 1MHz	–	5	13	mA
			CLK = 40MHz	–	7	15	mA
			CLK = 54MHz	–	8	16	mA
V_IL	Input low level	VCC = 2.7V~3.6V		-0.3	–	0.8	V
V_IH	Input high level	VCC = 2.7V~3.6V		VCC-0.4	–	VCC+0.3	V
V_OL	Output low level	I_OL = 3.1mA		–	–	0.2VCC	V
VOH	Output high level	IOH = -3.1mA		0.8VCC	–	–	V

Pin capacitance

Symbol

Parameter

Typ.

Max

Unit

C_P

External capacitors for VCC/VSS power supply

–

μF

CIN

Control input capacitor

–

рF

CIO

IO capacitor

–

рF

CLOAD

Load capacitance

–

рF

PM004MNEB

Product Catgories

Core Ties, New Future

Selection application reference for LDO voltage regulator chip

Application of three-phase voltage measurement based on SSP1839

Application of Siproin SST-MRAM in Smart Meters

Tech Gala Unveils New Era in Electronics Industry

STT-MRAM Non-volatile magnetic random access memory

Short Description:

Product Detail