PM002MNxB
PM002 is a 2M Bit/256K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO(Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.
PM001MNxB
PM001 is a 1M Bit/128K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO (Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.
PU32F408
This chip is a highly integrated SOC chip that supports HPLC communication. The physical layer complies with the national grid standard Q/GDW12087.41. It adopts advanced digital-analog hybrid design technology and process, fully integrating the HPLC analog front-end circuit, digital signal processing circuit, memory, and MCU onto a single chip, thereby completing data modulation and demodulation as well as protocol layer processing.
The HPLC communication channel of this chip uses OFDM modulation and demodulation method, supporting a signal frequency range of 200KHz to 12MHz. It can support up to 411 subcarriers and supports BPSK, QPSK and 16QAM mapping for different rate modes to achieve a maximum transmission speed of 12Mbps. The chip is equipped with a powerful Turbo forward error correction and interleaving technology, and the transmission mode is flexible and configurable, enabling reliable communication even under strong noise interference.
This chip integrates a 32-bit MCU core and a rich set of on-chip resources, which can meet the software functional requirements and application development needs of the MAC layer and above of the power grid dual-mode communication protocol layer.
SSP9492
SSP9492 is a monolithically integrated switched-off step-down constant-voltage driver with programmable output current, which can operate over a wide input voltage range and has excellent load and linearity regulation. Safety protection mechanisms of SSP9492 include peak current limiting per cycle, soft-start, over-voltage protection, temperature protection and short circuit protection, etc. It is very suitable for wide voltage input buck use. The unique soft-switching ZVS technology combined with the super junction medium-voltage MOSFET enables efficiency up to 93%. It supports typical circuit applications such as input 48V output 12V/2.5A, input 19V output 5V/4A, input 85V output 12V/2A, input 12V output 5V/3A.
SSP9323
SSP9323 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to provide a 3A continuous output current over a wide input supply range, with excellent load and line regulation. COT PSM control operation provides very fast transient response and easy loop design as well as very tight output regulation. The RY9320 requires a minimal number of readily available, external components and is available in a space saving ESOP-8 package.
SSP9322
SSP9322 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to provide a 2A continuous output current over a wide input supply range, with excellent load and line regulation. COT PSM control operation provides very fast transient response and easy loop design as well as very tight output regulation. The RY9320 requires a minimal number of readily available, external components and is available in a space saving SOT23-6 package.
PM004MNIB
PM004 is a 4M Bit/512K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO (Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.
PM004MNEB
PM004 is a 4M Bit/512K Byte capacity SPI (Serial Single-Wire) interface STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) chip. Its data is non-volatile with a retention time exceeding 10 years. The chip supports independent 1-bit SI (Serial Input) and SO (Serial Output) interfaces, allows continuous writing or reading of data bytes at its maximum clock frequency, and features zero write latency.
PN256KNIA
The PN256K is a 256K Bit/32K Byte IIC interface non-volatile memory. It adopts advanced PMTJ STT-MRAM technology to achieve read and write transmission of up to 400kHz, with excellent reliability and more than 20 years of data retention time.
PM256KNIA
PM256K is a 256K Bit/32K Byte SPI interface non-volatile memory. The chip adopts advanced PMTJ STT-MRAM technology, supports single-line SI and SO independent interfaces, achieves up to 20MHz read and write transmission, and has no delay in writing. It has excellent reliability and more than 20 years of data retention time. PM256K is an ideal solution for MCU to expand external memory. At the same time, due to the characteristics of fast throughput, few pins and small size, it has gradually become the choice of applications such as embedded, network switches, automobiles and the Internet of Things.
