H73XX-A

Absolute Maximum Ratings

Note: These are stress ratings only. Stresses exceeding the range specified under “Absolute Maximum Ratings” may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability.

Electrical Characteristics

H7315-A，+1.5V Output Type

Parameter	Symbol	Test Conditions		Min.	Typ.	Max.	Unit
		VIN	Conditions
Output Voltage	VOUT	3.5V	IOUT=40mA	1.470	1.500	1.530	V
Output Current	IOUT	3.5V	–	–	250	–	mA
Load Regulation	ΔVOUT	3.5V	1mA≤IOUT≤60mA	–	45	90	mV
Voltage Drop(Note)	VDIF	–	IOUT=40mA ΔVOUT=2%	–	100	–	mV
Current Consumption	ISS	3.5V	No load	–	2.0	3.0	μA
Line Regulation		–	2.5V≤VIN≤12V IOUT=40mA	–	0.2	–	%/V
Input Voltage	VIN	–	–	–	–	15	V
Temperature Coefficient		3.5V	IOUT=40mA -40℃<Ta<85℃	–	±0.5	–	mV/℃

Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load.

H7318-A，+1.8V Output Type

Parameter	Symbol	Test Conditions		Min.	Typ.	Max.	Unit
		VIN	Conditions
Output Voltage	VOUT	3.8V	IOUT=40mA	1.764	1.800	1.836	V
Output Current	IOUT	3.8V	–	–	250	–	mA
Load Regulation	ΔVOUT	3.8V	1mA≤IOUT≤60mA	–	45	90	mV
Voltage Drop(Note)	VDIF	–	IOUT=40mA ΔVOUT=2%	–	100	–	mV
Current Consumption	ISS	3.8V	No load	–	2.0	3.0	μA
Line Regulation		–	2.8V≤VIN≤12V IOUT=40mA	–	0.2	–	%/V
Input Voltage	VIN	–	–	–	–	15	V
Temperature Coefficient		3.8V	IOUT=40mA -40℃<Ta<85℃	–	±0.5	–	mV/℃

H7325-A，+2.5V Output Type

Parameter	Symbol	Test Conditions		Min.	Typ.	Max.	Unit
		VIN	Conditions
Output Voltage	VOUT	4.5V	IOUT=40mA	2.450	2.500	2.550	V
Output Current	IOUT	4.5V	–	–	250	–	mA
Load Regulation	ΔVOUT	4.5V	1mA≤IOUT≤60mA	–	45	90	mV
Voltage Drop(Note)	VDIF	–	IOUT=40mA ΔVOUT=2%	–	100	–	mV
Current Consumption	ISS	4.5V	No load	–	2.0	3.0	μA
Line Regulation		–	3.5V≤VIN≤12V IOUT=40mA	–	0.2	–	%/V
Input Voltage	VIN	–	–	–	–	15	V
Temperature Coefficient		4.5V	IOUT=40mA -40℃<Ta<85℃	–	±0.5	–	mV/℃

Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load.

H7328-A，+2.8V Output Type

Parameter	Symbol	Test Conditions		Min.	Typ.	Max.	Unit
		VIN	Conditions
Output Voltage	VOUT	4.8V	IOUT=40mA	2.744	2.800	2.856	V
Output Current	IOUT	4.8V	–	–	250	–	mA
Load Regulation	ΔVOUT	4.8V	1mA≤IOUT≤60mA	–	45	90	mV
Voltage Drop(Note)	VDIF	–	IOUT=40mA ΔVOUT=2%	–	100	–	mV
Current Consumption	ISS	4.8V	No load	–	2.0	3.0	μA
Line Regulation		–	3.8V≤VIN≤12V IOUT=40mA	–	0.2	–	%/V
Input Voltage	VIN	–	–	–	–	15	V
Temperature Coefficient		4.8V	IOUT=40mA -40℃<Ta<85℃	–	±0.5	–	mV/℃

Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load.

H7330-A，+3.0V Output Type

Parameter	Symbol	Test Conditions		Min.	Typ.	Max.	Unit
		VIN	Conditions
Output Voltage	VOUT	5V	IOUT=40mA	2.940	3.000	3.060	V
Output Current	IOUT	5V	–	–	250	–	mA
Load Regulation	ΔVOUT	5V	1mA≤IOUT≤80mA	–	45	90	mV
Voltage Drop(Note)	VDIF	–	IOUT=40mA ΔVOUT=2%	–	100	–	mV
Current Consumption	ISS	5V	No load	–	2.0	3.0	μA
Line Regulation		–	4V≤VIN≤12V IOUT=40mA	–	0.2	–	%/V
Input Voltage	VIN	–	–	–	–	15	V
Temperature Coefficient		5V	IOUT=40mA -40℃<Ta<85℃	–	±0.5	–	mV/℃

Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load.

H7333-A，+3.3V Output Type

Parameter	Symbol	Test Conditions		Min.	Typ.	Max.	Unit
		VIN	Conditions
Output Voltage	VOUT	5.3V	IOUT=40mA	3.234	3.300	3.366	V
Output Current	IOUT	5.3V	–	–	250	–	mA
Load Regulation	ΔVOUT	5.3V	1mA≤IOUT≤80mA	–	45	90	mV
Voltage Drop(Note)	VDIF	–	IOUT=40mA ΔVOUT=2%	–	100	–	mV
Current Consumption	ISS	5.3V	No load	–	2.0	3.0	μA
Line Regulation		–	4.3V≤VIN≤12V IOUT=40mA	–	0.2	–	%/V
Input Voltage	VIN	–	–	–	–	15	V
Temperature Coefficient		5.3V	IOUT=40mA -40℃<Ta<85℃	–	±0.5	–	mV/℃

Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load.

H7336-A，+3.6V Output Type

Parameter	Symbol	Test Conditions		Min.	Typ.	Max.	Unit
		VIN	Conditions
Output Voltage	VOUT	5.6V	IOUT=40mA	3.528	3.600	3.672	V
Output Current	IOUT	5.6V	–	–	250	–	mA
Load Regulation	ΔVOUT	5.6V	1mA≤IOUT≤80mA	–	45	90	mV
Voltage Drop(Note)	VDIF	–	IOUT=40mA ΔVOUT=2%	–	80	–	mV
Current Consumption	ISS	5.6V	No load	–	2.0	3.0	μA
Line Regulation		–	4.6V≤VIN≤12V IOUT=40mA	–	0.2	–	%/V
Input Voltage	VIN	–	–	–	–	15	V
Temperature Coefficient		5.6V	IOUT=40mA -40℃<Ta<85℃	–	±0.5	–	mV/℃

Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load.

H7340-A，+4.0V Output Type

Parameter	Symbol	Test Conditions		Min.	Typ.	Max.	Unit
		VIN	Conditions
Output Voltage	VOUT	6.0V	IOUT=40mA	3.920	4.000	4.080	V
Output Current	IOUT	6.0V	–	–	250	–	mA
Load Regulation	ΔVOUT	6.0V	1mA≤IOUT≤80mA	–	45	90	mV
Voltage Drop(Note)	VDIF	–	IOUT=40mA ΔVOUT=2%	–	80	–	mV
Current Consumption	ISS	6.0V	No load	–	2.0	3.0	μA
Line Regulation		–	5V≤VIN≤12V IOUT=40mA	–	0.2	–	%/V
Input Voltage	VIN	–	–	–	–	15	V
Temperature Coefficient		6.0V	IOUT=40mA -40℃<Ta<85℃	–	±0.5	–	mV/℃

Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load.

H7344-A，+4.4V Output Type

Parameter	Symbol	Test Conditions		Min.	Typ.	Max.	Unit
		VIN	Conditions
Output Voltage	VOUT	6.4V	IOUT=40mA	4.312	4.400	4.488	V
Output Current	IOUT	6.4V	–	–	250	–	mA
Load Regulation	ΔVOUT	6.4V	1mA≤IOUT≤80mA	–	45	90	mV
Voltage Drop(Note)	VDIF	–	IOUT=40mA ΔVOUT=2%	–	80	–	mV
Current Consumption	ISS	6.4V	No load	–	2.0	3.0	μA
Line Regulation		–	5.4V≤VIN≤12V IOUT=40mA	–	0.2	–	%/V
Input Voltage	VIN	–	–	–	–	15	V
Temperature Coefficient		6.4V	IOUT=40mA -40℃<Ta<85℃	–	±0.5	–	mV/℃

Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load.

H7350-A，+5.0V Output Type

Parameter	Symbol	Test Conditions		Min.	Typ.	Max.	Unit
		VIN	Conditions
Output Voltage	VOUT	7V	IOUT=40mA	4.900	5.000	5.100	V
Output Current	IOUT	7V	–	–	250	–	mA
Load Regulation	ΔVOUT	7V	1mA≤IOUT≤80mA	–	45	90	mV
Voltage Drop(Note)	VDIF	–	IOUT=40mA ΔVOUT=2%	–	80	–	mV
Current Consumption	ISS	7V	No load	–	2.0	3.0	μA
Line Regulation		–	5.4V≤VIN≤12V IOUT=40mA	–	0.2	–	%/V
Input Voltage	VIN	–	–	–	–	15	V
Temperature Coefficient		7V	IOUT=40mA -40℃<Ta<85℃	–	±0.5	–	mV/℃

Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load.

Order specification