SSP7785
The SSP7785 is a high−performance linear regulator, offering a very wide operating input voltage range of up to 450 VDC, with an output current of up to 10 mA. Ideal for high input voltage applications.
The SSP7785 family offers ±5% initial accuracy, extremely high−power supply rejection ratio and ultra−low quiescent current. The SSP7785 is optimized for high−voltage line and load transients, making this part ideal for harsh environment applications. The SSP7785 is offered in fixed output voltage options
2.7V,3.3V and 5.0V.
SSP809
The SSP809 series are highly accurate, low power consumption voltage detectors, manufactured using CMOS and laser trimming technologies. A delay circuit is built-in to each detectors. Detect voltage is extremely accurate with minimal temperature drift. Both CMOS and N-ch open drain output configurations are available. Since the delay circuit is built-in, peripherals are unnecessary and high density mounting is possible.
ULN2803
ULN2803 is a single-chip integrated high voltage, high current Darlington tube array, The circuit contains eight independent Darlington tube drive single channel. The circuit is designed with continuous diode, which can be used to drive relay, stepping motor and other inductive loads. A single darlington collector can output 500mA current. Higher output current capacity can be achieved by connecting darlington tubes in parallel.
ULN2001D
The ULN2001D is high-voltage high-current Darlington transistor arrays each containing three open collector common emitter pairs. Each pair is rated at 500mA. Suppression diodes are included for inductive load driving, the inputs and outputs are pinned in opposition to simplify board layout.
These devices are capable of driving a wide range of loads including solenoids, relays, DC motors, LED displays, filament lamps, thermal print-heads and high-power buffers.
The ULN2001D is available in both a small outline 8-pin package (DIP8, SOP8 ).
SSP584X
SSP584X series is a Quad-channel digital isolator, using chip level high voltage isolation process, isolation voltage up to 5KVrms. This series of products have low radiation, excellent anti-electromagnetic interference performance, high transmission rate and low power consumption; Equipped with enable pins to place the output in a high impedance state.
It has fail-safe mode, which can restore the output to the default state when the input power loss. This series of products have 4 in 0 out, 3 in 1 out, 2 in 2 out and other specifications, the specific product information, see the product selection table.
SSP9810
The SSP9810 is a high frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to achieve a 1.2A continuous output current over a wide input supply range, with excellent load and line regulation.The SSP9810 requires a minimal number of readily available, external components and is available in a space saving SOT23-6 package.
SSP9481
The SSP9481 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input Voltage range (4.5V to 80V) provides high efficiency output of 1A current. Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fail-state protection includes cycle-by-cycle current-limiting protection and thermal shutdown protection.
SSP9480
The SSP9480 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input Voltage range (4.5V to 80V) provides high efficiency output of 1.2A current. Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fail-state protection includes cycle-by-cycle current-limiting protection and thermal shutdown protection.
SSP9461
The SSP9461 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input range(4.5V to 60V) provides high efficiency output of 1.2A current. Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fault state protection includes Cycle by Cycle OCP and thermal shutdown protection.
SSP9459
The SSP9459 is a monolithic, step-down, switch-mode converter with a built-in power MOSFET. It achieves a 0.5A peak-output current over a wide input supply range with excellent load and line regulation. Current-mode operation provides a fast transient response and eases loop stabilization.
The wide input range(4.5V to 60V) provides high efficiency output of 0.5A current, Low shutdown mode quiescent current of 0.1μA is suitable for battery-powered applications.
Fault condition protections include cycle-by-cycle current limiting and thermal shutdown.