SSP583X
The SSP583X series are 3-channel digital isolators using chip-scale high-voltage isolation technology withstanding 5KVrms. These devices feature low radiation, superior anti-EMI performance, high data rate and low power consumption. An enable pin places the outputs in a high-impedance state. The fail-safe mode restores outputs to the default level when the input supply is unpowered. The series offers 3-in-0-out and 2-in-1-out configurations — see the Selection Table for full product details.
SSP582X
SSP582X series is a Dual-channel digital isolator, using chip level high voltage isolation process, isolation voltage up to 5KVrms. This series of products have low radiation, excellent anti-electromagnetic interference performance, high transmission rate and low power consumption. It has fail-safe mode, which can restore the output to the default state when the input power loss. This series of products have 2 in 0 out, 1 in 1 out, and other specifications, the specific product information, see the product selection table.
SSP55080
SSP55080 is a general LCD driver IC with 8COMx35SEG total output capacity of 280 bits, suitable for commonly used character/graphic LCD screens. SSP55080 support serial data interface(I2C).
SSP8011AM
The SSP8011AM is a low-cost and low-power single-key capacitive touch sensor IC, which provides single-channel touch sensing channels. Built-in voltage regulator circuit, few peripheral components, simple design, only a few components can complete the hardware design. Provides 2 output modes, high/low level output optional. It also provides a Reset function after a maximum button press time of 9 second. The sensitivity of the touch-sensitive keys can be adjusted as needed by adjusting the capacity of the external capacitance (CS), which increases the operability of the product and makes the design more flexible and versatile.
SSP706
SSP706 — Voltage Detection and Reset Chip: TTL/CMOS
SSP8012
The SSP8012 is a low-power dual-key touch sensor IC. The operating mode is divided into Normal mode and Low Power mode.
PM002MNEB
PM002 adalah chip antarmuka SPI (Serial Single-Wire) berkapasitas 2M Bit/256K Byte dengan antarmuka STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory). Datanya tidak mudah menguap dengan waktu penyimpanan melebihi 10 tahun. Chip ini mendukung antarmuka SI (Serial Input) dan SO (Serial Output) 1-bit yang independen, memungkinkan penulisan atau pembacaan byte data secara terus menerus pada frekuensi clock maksimum, dan memiliki latensi penulisan nol.
SSP8018
SSP8018 is a synchronous boost converter designed for battery-powered devices. The device supports a variety of battery types, including alkaline, nickel-metal hydride rechargeable batteries, lithium-manganese batteries, and lithium-ion rechargeable batteries. Its standout advantage lies in its high efficiency under light load conditions, a characteristic crucial for extending battery life.
In the application scenario of 3.3V boost to 5V, the chip is able to output current up to 300mA. Of particular note is the system achieving up to 90% conversion efficiency at a load current of 200mA.
SSP8018 chip offers two operating modes to suit different application scenarios: buck mode and pass-through mode. In buck mode, when the input voltage is higher than the output voltage (VOUT<VIN<VOUT + 0.3V), the chip can still accurately adjust the output voltage to the target value.
This mode is suitable for scenarios where a stable output voltage is required. When the input voltage exceeds the output voltage by more than 0.3V (VIN>VOUT + 0.3V), the chip automatically switches from buck mode to pass-through mode. In pass-through mode, the output voltage will follow the input voltage.
SSP8018 has a true shutdown function that completely disconnects the load from the input power supply when the device is disabled, significantly reducing current consumption.
SSP8018 is available in a fixed output voltage version.
PM002MNIB
PM002 adalah chip antarmuka SPI (Serial Single-Wire) berkapasitas 2M Bit/256K Byte dengan antarmuka STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory). Datanya tidak mudah menguap dengan waktu penyimpanan melebihi 10 tahun. Chip ini mendukung antarmuka SI (Serial Input) dan SO (Serial Output) 1-bit yang independen, memungkinkan penulisan atau pembacaan byte data secara terus menerus pada frekuensi clock maksimum, dan memiliki latensi penulisan nol.
PM001MNxB
PM001 adalah chip SPI (Serial Single-Wire) antarmuka STT-MRAM (Spin-Transfer Torque Magnetic Random Access Memory) berkapasitas 1M Bit/128K Byte. Datanya tidak mudah menguap dengan waktu penyimpanan melebihi 10 tahun. Chip ini mendukung antarmuka SI (Serial Input) dan SO (Serial Output) 1-bit yang independen, memungkinkan penulisan atau pembacaan byte data secara terus menerus pada frekuensi clock maksimum, dan memiliki latensi penulisan nol.