SSP2617
SSP2617 is a single-channel H-bridge driver chip, providing an integrated motor drive solution for toys, robots, consumer goods and other low-voltage or battery-powered motion control applications.
The maximum operating voltage of SSP2617 is 25V. It can provide a continuous output current of up to 3.0A and a peak output current of 5.0A. It also features over-temperature protection with a shut-off function and overcurrent protection (IOCP = 5.0A).
SSP2927
The SSP2927 provides an integrated motor driver solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
The device can drive one dc motor or other devices like solenoids. The output driver block consists of N- channel power MOSFETs configured as an H-bridge to drive the motor winding. An internal charge pump generates needed gate drive voltages.
The SSP2927 can supply up to 1.8A of output current. It operates on a motor power supply voltage from 0 to 12 V, and a device power supply voltage of 1.8 V to 7 V.
The SSP2927 device has a PWM (IN1-IN2) input interface. It is compatible with industry-standard devices.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature.
SSP6206
SSP6206 series are a highly precise, lower consumption, 3 terminal, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage .
The SSP6206 consists of a current limiter circuit, a driver transistor, a precision reference voltage and an error correction circuit. The series is compatible with low ESR ceramic capacitors. The current limiter’s foldback circuit operates as a short circuit protection as well as the output current limiter for the output pin. Output voltages are internally by laser trimming technologies. The output voltage can be selected from 1.5V to 3.6V. SSP6206 series are available in SOT-23,SOT23-3 and SOT89 packages.
SSP8810
SSP8810 is a low voltage DC motor driver chip specially designed for low voltage operating systems. 4 low resistance MOS and forward, reverse, brake and stop functions are integrated.SSP8810 built-in temperature protection function, when the output short circuit occurs, the output current instantly increases, the circuit power consumption rises sharply, the chip temperature rises sharply, when the chip temperature exceeds the maximum temperature point set by the internal temperature protection circuit, the internal circuit turns off the built-in power switch tube, cut off the load current.
SSP3085
The SSP3085 is a half-duplex high speed transceiver for RS-485 and RS422 communication. IC contains one driver and one receiver.
The SSP3085 has a fail-safe circuit, ensure logical high level of receiver output when receiver input is open or short. It can achieve error-free data transmission of up to 500kbps. Each driver output and receiver input is protected against ±15kV electrostatic discharge (HBM) (ESD)shocks.
The SSP3085 receiver has 1/8 unit load input impedance, allows up to 256 devices can be attached to the bus.
