SSP2617
SSP2617 is a single-channel H-bridge driver chip, providing an integrated motor drive solution for toys, robots, consumer goods and other low-voltage or battery-powered motion control applications.
The maximum operating voltage of SSP2617 is 25V. It can provide a continuous output current of up to 3.0A and a peak output current of 5.0A. It also features over-temperature protection with a shut-off function and overcurrent protection (IOCP = 5.0A).
SSP2927
The SSP2927 provides an integrated motor driver solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
The device can drive one dc motor or other devices like solenoids. The output driver block consists of N- channel power MOSFETs configured as an H-bridge to drive the motor winding. An internal charge pump generates needed gate drive voltages.
The SSP2927 can supply up to 1.8A of output current. It operates on a motor power supply voltage from 0 to 12 V, and a device power supply voltage of 1.8 V to 7 V.
The SSP2927 device has a PWM (IN1-IN2) input interface. It is compatible with industry-standard devices.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature.
SSP8810
SSP8810 is a low voltage DC motor driver chip specially designed for low voltage operating systems. 4 low resistance MOS and forward, reverse, brake and stop functions are integrated.SSP8810 built-in temperature protection function, when the output short circuit occurs, the output current instantly increases, the circuit power consumption rises sharply, the chip temperature rises sharply, when the chip temperature exceeds the maximum temperature point set by the internal temperature protection circuit, the internal circuit turns off the built-in power switch tube, cut off the load current.
